Bogie Suspension
Suspension is a general term for all force transmission devices between a frame (or a load-bearing body) of a car and an axle (or a wheel), and its function is to transmit a force and a force twist acting between the wheel and the frame, and Buffer the impact force transmitted from the uneven road to the frame or the body, and reduce the vibration caused by it to ensure that the car can run smoothly.
Product Advantage of Bogie suspension
The advantages of bogie suspension:
The light weight reduces the impact on the body and improves the ground adhesion of the wheel; the softer spring with less stiffness can improve the comfort of the car; the engine position can be lowered, the car center of gravity can be reduced, and the car can be driven. Stability; the left and right wheels are individually beating and independent of each other, which can reduce the tilt and vibration of the body.
Modern cars mostly use single-point suspension systems. According to their different structural forms, single-point suspension systems can be divided into cross-arm type, trailing arm type, multi-link type, candle type and McPherson suspension system.
Product Parameters of Used trailer axle
|
Modle |
Capacity |
Bearing |
Axle tube |
Dual Spacing |
Track |
Spring Denter |
|
LHDC24 |
24T |
33213 33218 |
150*150*12 |
1850mm |
1400mm |
980mm |
|
LHDC24 |
28T |
33215 33219 |
150*150*14 |
1850mm |
1550mm |
900mm |
|
LHDC24 |
32T |
32314 32222 |
150*150*16 |
1850mm |
1550mm |
900mm |
Product Detail
Machine Parts
Name: Suspension front branch
Original: China
The front branch of the suspension is the head of a suspension, which is the comparative large part of a suspension.
Machine Parts
Name: Suspension middle branch
Original: China
The suspension middle branch is an accessory for connecting two leaf springs. There are two interfaces.
Machine Parts
Name: leaf spring
Original: China
A plate spring made up of not less than one piece of spring steel superposed.Leaf springs are commonly used in wheeled vehicle suspensions, originally called laminate or bracket springs, sometimes referred to as semi-elliptical springs or trolley springs, and are one of the oldest spring forms dating back to the Middle Ages.
Machine Parts
Name: Suspension back branch
Original:China
The back branch of the suspension is the end of a suspension, which is the comparative small part of a suspension.
Factory Show
Package Delivery
Hot Tags: bogie suspension, China bogie suspension manufacturers, suppliers, factory
Previous
Disc Brake AxleYou Might Also Like
Send Inquiry